Your name *

    Your e-mail *


    Type of enquiry


    Consent for the processing of personal data

    Turboexpander-compressor unit ADKG-5For low flow rates

    • Content is under developmentUp to 5 MM m³/h
    • Content is under developmentUp to -170°С
    • Content is under developmentUp to 13.5 MPa
    • Content is under developmentMagnetic suspension
    Content is under development
    Basic information

    Designed specifically for low flow rates and based on the reliable and successful ADKG-10 series — an ideal opportunity to fully utilize the available resources.

    It is an essential element of technological designs and can be used to cool natural gas in low temperature separation (LTS) cycles, fractional condensation separation (FCS), cyclo-ORC, dehydrogenation, liquefaction and other gas-bearing chemical processes.

    It can be installed indoors at a room temperature of +5 .. + 45 C (UHL4 as per GOST 15150-69) and is designed as a monoblock with a horizontal shell connector. A single-stage centrifugal compressor and an axial turbine, usually single-stage with an inlet guide nozzle, are installed on the rotor of the replaceable flow part.

    Technical specifications
    Frame size
    Shell connector Horizontal
    Bearings Active magnetic
    Gas flow, MMm3 / d 3..12
    Inlet pressure, MPa 6..13.5
    Temperature, °C -5...-170
    Rotation frequency, rpm 12000...17000
    Power on the shaft, kW 700...7300
    Compression level 1.46 max
    Adiabatic efficiency, % 80 min
    Polytropic efficiency, % 82 min
    Expansion level 2.3 max
    Adiabatic efficiency, % 80 min
    Nozzle adjustment range, % 8-20
    Weight and size parameters
    Equipment Length, mm Width, mm Height, mm Weight, kg
    Packing options
    • Content is under development


      The basic modification is a monoblock in a mounting frame with tubing, measurement and control instrumentation, and skid accessories
    • Content is under development

      ADKG-5 with valve skid

      The integrated solution – a basic unit with a skid of shut-off and control valves in a mounting frame: start-up, protection and bypass without stopping the main production line.
    • Content is under development

      Turboexpander in modular shelter

      A comprehensive solution —a basic valve skid unit in an easily assembled modular shelter with engineering systems and small scale mechanization facilities.
    Completed projects based on ADKG-5
    Units in operation: